Model # CCA-ST Serial # 068983014 ( RACKS DO NOT COME WITH THIS )

Dispensing Mechanism: ( i believe Servolift is now Piper Products-Built to last products! )

Ball bearing guides and a single stainless steel aircraft type cable keep the carrier level in all directions, even with an unbalanced load.

Rack size-i measured is 19 1/4 x 19 1/4, which they might call it a 20 x 20 in the brochure, can fit on the space. The other rack size i noticed that we have, i tried it, and they are 9 3/4" wide x 19 1/4-which might be considered 20" you can fit two of them on the space too.

The brochure indicates you can have a 14 x 20, but i don't a rack that size to try it on.

There is a adjustment on the side of the cart, to Lower or raise the frame i think it is called.

Adjustment:

Adjustment for various weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.

It has one piece, wrap-around, non-marking, vinyl bumper.

Capacity: Up to 192 glasses or 175 cups, in racks.

IF THIS CART WAS NEW, YOU WOULD PAY $1149.00 AND THE LIST PRICE IS $ 2159.00 FOR NEW.

WHY BUY NEW, WHEN PRE-OWNED WILL DO !

According to the Piper web site: FRAME AND BODY:

The frame is constructed of all welded heavy gauge stainless steel and mounted on a 12 ga. stainless steel "Z" section base. The body is 20 ga. stainless steel on all sides and top, and is fitted with a stainless steel tubular push handle. The front panel is removable for adjustment access.

DISPENSING MECHANISM: According to the Piper web site:

The rack carrier, constructed of all welded 16 ga. stainless steel, is raised by a series of coil springs attached to the frame. Ball bearing guides and a single stainless steel aircraft type cable keep the carrier level in all directions, even with an unbalanced load. The cable runs over pre-lubricated plated steel pulleys.

ADJUSTMENT: According to the Piper web site:

Adjustment for various weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.

Approx. size: 23" w, 31" d, 36" h.

Approx. weight: 150 Lbs. NSF Approved